Sunday, January 18, 2009

1986 Mercedes Motorhome

Re-installing the cover or lid that covers the points.

Re-installing the cover or lid that covers the points.

Hello my dear invisible readers, this time step will narrate a very simple task.

dive into this area.

Ingredients needed for this recipe:

Phillips screwdriver tip # 2.

Step 1.

To start This part will be compulsory subject at hand the top, two screws and a new gasket, see photo # 1.1, the first thing I did was to place the gasket on the inside edge of the cover, see photo # 1.2, then present in proper place and lined up the holes as much as possible, see photo # 1.3 is finally only tighten the screws and voila, the cover should look like picture # 1.4.

Photo # 1.1-The cover with two screws and gasket.

Photo # 1.2.-Placing the packer to the top.

Photo # 1.3 .- Align the lid with holes

Photo # 1.4- Tighten the two screws holding the lid.

Photo # 1.5.-The platinera cap in place of honor.

As you can see was a fairly easy and simple to do, see you soon with another topic soon.