Doctor Can You Help Me?

.

Hello to all my faithful readers invisible in this opportunity, I will show how Disassembly beam beam rear rim, I needed to do this, because my rear rim was slightly bent requiring replacement, while taking advantage of to send to polish the drum brakes for a flawless finish.

Ingredients needed for this recipe

In principle, the hands, the best tool in the world.

peculiar shape tool, especially to remove the nipple, see photo a.

Photo a. - Special tool to remove the nipples.

Step 1.

To start, we get a little hands and we do it with a old axle or the Original, as in a press, a way to provide a basis for working comfort, see Photo # 1.4.

Photo # 1.1.-An old axle secured with a press we come to the hair.

Then we can remove the inner rubber, which protects the gut or inner chamber of the edges of the nipples and spokes, see photo # 1.2.

Photo # 1.2.-Taking the rubber casing protects or bedroom.

place wheel in the gear that we did before, see picture # 1.3.

Photo # 1.3.-The rear wheel positioned so that we can work in comfort.

Using the special tool, we started to loosen each nipple into the red circle of each ray, a total of 40, see photo # 1.4.

Photo # 1.4.-loosening nipple, and nipple ray beam ..

We loosening one by one, see picture # 1.5.

1.5.-Me Photo # 39 is loosen nipples ..

Remember, first loosen all the nipples and after that the van is retiring, see photo # 1.6.

Photo # 1.6.-One of 40 tedious nipples removed.

it is finished, we can initiate the removal of each beam, in this case everyone is equal, if they see that they are in poor condition, replace it, see photos # 1.7, 1.8, 1.9, 1.10

Photo # 1.7.-Removing one of the 40 rays.

Photo # 1.8.-Way as it is becoming loose ring drum brakes, see arrows retired rays ..

Photo # 1.9.-Armed with divine patience, we are taking ray by ray.

Photo # 1.10.-A rays that are on the rear rim.

Well taken the 40 rays, the end result should be a ring completely disassembled and separated from the brake drum, like this ...

U

this one.

Well, ready then to change the ring and send a new one to polish the brake drum, then we will be playing all over again being reset task new rubber mount or rubber.

I hope this party has been welcomed of all of you and that you enjoyed, see you soon with the next delivery to be none other than the disarmament of the front wheel to apply the same process, do not miss, a big hug.